Route determination identifies a suitable transportation path between an origin and destination, possibly via intermediate locations. SAP TM can derive or evaluate routes, distances and durations using configured default routes, transportation lanes, network paths and other methods. Actual carrier execution, disruptions and arrival evidence remain separate from the planning result.
What a route means in transportation planning
A route is more than a line on a map. It establishes the intended sequence of pickup, transshipment and delivery locations, with constraints such as transport mode, available lanes, schedules, travel time and destination service windows. Route determination is relevant before a planner can promise a feasible arrival time or select appropriate capacity.
SAP documentation describes several routing methods, including configured default routes, lane/distance/duration determination and network path determination. Depending on profile settings, methods can be tried in a sequence. The first successful routing result may be retained while later methods fill missing durations rather than replacing the entire route.
Direct lane versus transshipment example
Consider a shipment from factory A to customer C. A preferred direct service is temporarily unavailable. The network has an available leg from A to hub B and another from B to C. A network path can propose A → B → C, subject to schedule and location restrictions. A calculated straight-line distance, on the other hand, is not evidence that a usable road, rail service or booking exists.
What consultants should validate
- Location quality: accurate addresses, calendars and zone membership are essential for useful results.
- Network scope: define permitted lanes, means of transport, transshipment points and restrictions.
- Scheduling: check driving time, wait time, cargo cut-offs and delivery windows, rather than relying on an unexamined default.
- Responsibility: determine which exceptions trigger replanning and who signs off carrier-specific changes.
Route determination should be tested with normal lanes, missing lanes, alternative hubs and time-critical shipments. A planned route can be revised during execution; physical milestones should always be interpreted from operational evidence.
Related N2i Knowledge
Official SAP References
SAP Help — Routing Methods · SAP Help — Transportation Distance and Duration